← All lectures
Quant · Lecture 08

Time, Work and Pipes (Rate, LCM method, wages, cisterns)

समय, कार्य और पाइप-टंकी

Ye lecture lagbhag 45 minute ka hai. Time and Work aur Pipes ek hi chapter hain: kaam ko rate samjho, LCM se units banao, aur har sawaal ek hi tareeke se khulta hai. Ek-ek section aaram se lo, worked example khud copy mein lagao, phir end ke 12 questions karo.

Quick answer: Time, Work and Pipes (Rate, LCM method, wages, cisterns)

Work = Rate × Time. If A finishes a job in n days, A's one-day work is 1/n of the job.

  • LCM: Total work in units (Efficiency = LCM ÷ days)
  • ab/(a+b): Two workers together (10 and 15 days → 6 days)
  • Cycle: Alternate days (Work per 2 days; check last bit)
  • M×D×H: Chain rule (Men × days × hours ÷ work stays equal)

काम = दर × समय। यदि A किसी काम को n दिन में पूरा करता है, तो उसका एक दिन का काम पूरे काम का 1/n भाग होता है।

At a glance

1Work, rate and the LCM method

काम, दर और LCM विधि

Work = Rate × Time. If A finishes a job in n days, A's one-day work is 1/n of the job.

2Working together

मिलकर काम करना

A, B and C finish a job in 12, 15 and 20 days. How long together?Step 1: Total work = LCM(12, 15, 20) = 60 units.Step 2: A = 5, B = 4, C = 3 units/day.Step 3: Together = 5 + 4 + 3 = 12 units/day.Answer: 60 ÷ 12 = 5 days.

3Leaving midway and pair rates

बीच में काम छोड़ना और जोड़ी की दरें

If someone leaves midway: (A's rate × A's days) + (B's rate × B's days) = 1 whole job. Find the work done so far, subtract it, then divide what is left by the rate of whoever remains.

4Alternate days

एकांतर दिनों में काम

On alternate days A works on day 1, B on day 2, A on day 3, and so on. Treat two days as one cycle: work per cycle = A's rate + B's rate.

5Efficiency, men-days and chain rule

कार्यक्षमता, मैन-डेज़ और चेन रूल

12 men working 8 hours a day finish a job in 15 days. How many days will 18 men take, working 10 hours a day?Step 1: Same job, so 12 × 15 × 8 = 18 × D × 10.Step 2: 1440 = 180 × D.Answer: D = 1440 ÷ 180 = 8 days.

6Wages

मज़दूरी का बँटवारा

Wages are shared in the ratio of work done = efficiency × days worked, not in the ratio of days alone.

7Pipes and cisterns

पाइप और टंकी

An inlet fills the tank (positive work). An outlet or a leak empties it (negative work). Net rate = inlet rates − outlet rates. Volume = rate × time.

8Pipes: closing, timing and alternating

पाइप: बंद करना, समय और बारी-बारी

A fills a tank in 6 h, B in 8 h. Both open for 2 h, then A is closed. How much longer does B need?Step 1: Capacity = LCM(6, 8) = 24 units. A = 4/h, B = 3/h.Step 2: In 2 h: 2 × 7 = 14 units. Left = 24 − 14 = 10 units.Answer: 10 ÷ 3 = 3 1/3 h = 3 h 20 min.

Time, Work and Pipes (Rate, LCM method, wages, cisterns): top SSC exam questions with answers

समय, कार्य और पाइप-टंकी: महत्वपूर्ण प्रश्न और उत्तर

Q1. A can complete 1/3 of a work in 5 days, and B can complete 2/5 of the same work in 10 days. In how many days can A and B together complete the whole work?

A किसी काम का 1/3 भाग 5 दिन में कर सकता है और B उसी काम का 2/5 भाग 10 दिन में कर सकता है। A और B मिलकर पूरा काम कितने दिन में कर सकते हैं?

Answer: 9 3/8 days (9 3/8 दिन)

A alone takes 5 ÷ 1/3 = 15 days and B alone takes 10 ÷ 2/5 = 25 days. LCM = 75: A = 5/day, B = 3/day, together 8/day. Time = 75 ÷ 8 = 9 3/8 days.

Q2. A and B together can finish a work in 12 days. A alone can finish it in 20 days. In how many days can B alone finish it?

A और B मिलकर एक काम 12 दिन में पूरा कर सकते हैं। A अकेला उसे 20 दिन में पूरा कर सकता है। B अकेला उसे कितने दिन में पूरा करेगा?

Answer: 30 days (30 दिन)

Total work = LCM(12, 20) = 60 units. A + B = 5/day and A = 3/day, so B = 2/day. B alone takes 60 ÷ 2 = 30 days.

Q3. A can complete a work in 18 days and B in 24 days. They work together for 6 days, and then A leaves. In how many more days will B finish the remaining work?

A एक काम को 18 दिन में और B 24 दिन में पूरा कर सकता है। वे 6 दिन साथ काम करते हैं, फिर A चला जाता है। B शेष काम को और कितने दिन में पूरा करेगा?

Answer: 10 days (10 दिन)

Total work = LCM(18, 24) = 72 units. A = 4/day, B = 3/day. In 6 days: 6 × 7 = 42 units. Left = 72 − 42 = 30 units. B needs 30 ÷ 3 = 10 days.

Q4. A and B together can complete a work in 12 days, B and C together in 15 days, and C and A together in 20 days. In how many days can A alone complete the work?

A और B मिलकर एक काम 12 दिन में, B और C मिलकर 15 दिन में तथा C और A मिलकर 20 दिन में पूरा कर सकते हैं। A अकेला काम कितने दिन में पूरा करेगा?

Answer: 30 days (30 दिन)

Total work = LCM(12, 15, 20) = 60. Pairs: 5, 4, 3 per day. 2(A+B+C) = 12, so A+B+C = 6. A = 6 − (B+C) = 6 − 4 = 2/day. A alone takes 60 ÷ 2 = 30 days.

Q5. A can complete a work in 12 days and B in 18 days. They work on alternate days, starting with A on the first day. In how many days will the work be completed?

A एक काम को 12 दिन में और B 18 दिन में पूरा कर सकता है। वे एकांतर दिनों में काम करते हैं और पहले दिन A शुरू करता है। काम कितने दिन में पूरा होगा?

Answer: 14 1/3 days (14 1/3 दिन)

Total work = LCM(12, 18) = 36. A = 3, B = 2, cycle = 5 units. 7 cycles = 14 days = 35 units. Left = 1 unit, done by A on day 15 in 1/3 day. Total 14 1/3 days.

Revise deck